All Products

IEC 61032 Test Probes Protection Of Persons And Equipment By Enclosures-Probe For Verification

IEC 61032 Test Probes Protection Of Persons And Equipment By Enclosures-Probe For Verification
Product Description

IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification

Standards & Clauses:

IEC61032:1997 “Protection of persons and equipment by enclosures-Probe for verification”

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)”

Samples and Restrictions:

Household appliances, electrical accessories, lamps, etc.

Application:

To verify

a)protection of persons against access to hazardous parts inside the enclosure;

b) protection of the equipment inside the enclosure against ingree of solid foreign object.

Test Principle:

The probes as per standard figures are used to distinguish the different protection levels of the electrical enclosure. After the current or force is applied to the probe, whether the probe can contact the live parts or internal parts, to determines whether the specimen is qualified or not.

Structure:

Nylon handle + steel probe.

Optional: wiring terminals for anti-electric shock test, or M6 threaded hole at the end of the handle for connecting with push-pull force gauge

Technical Parameters:

Probe & probe code Figure No. Description & application

mm

Forces to be applied

N

Access probe A Fig. 1 Sphere: Ф50 with handle, to verify protection of persons against access to hazardous parts or hazardous mechanical parts 50
Access probe B Fig.2 Jointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts 10
Access probe C Fig.3 Rod: Ф2.5 – length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts 3
Access probe D Fig.4 Wire: Ф1 – length 100,to verify protection of persons against access to hazardous parts or hazardous mechanical parts 1
Object probe 1 Fig.5 Sphere: Ф50, to verify protection of equipment against ingress of solid foreign objects with diameter≥50mm 50
Object probe 2 Fig.6 Sphere: Ф12.5,to verify protection of equipment against ingress of solid foreign objects with diameter≥12.5mm 30
Test Probe 11 Fig.7 Unjointed test finger, to verify protection of persons against access to hazardous parts or hazardous mechanical parts 50
Test Probe 12 Fig.8 Cylinder pin: Ф4 – length 50,to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 13 Fig.9 Conical pin: Ф3 to Ф4 – length 15, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 14 Fig.10 Bar: 3×1, to verify protection of persons against access to hazardous parts or hazardous mechanical parts 20
Test Probe 17 Fig.11 Wire: Ф0.5, to verify protection of persons against access to hazardous parts or hazardous mechanical parts
Test Probe 18 Fig.12 Small finger probe: Ф8.6 – length 57.9,to verify protection of children over 36 months younger than 14 years old against access to hazardous parts or hazardous mechanical parts 10
Test Probe 19 Fig.13 Small finger probe: Ф5.6- length 44, to verify protection of children younger than 36 months against access to hazardous parts or hazardous mechanical parts 10
Test Probe 31 Fig.14 Cone: Ф110/60, to verify protection of persons against access to hazardous mechanical parts 50
Test Probe 32 Fig.15 Rod: Ф25, to verify protection of persons against access to hazardous mechanical parts 30
Test Probe 41 Fig.16 Probe: Ф30, to verify protection of persons against access to hot or glowing parts
Test Probe 43 Fig.17 Bar: 50×5, to verify protection of persons against access to hot or glowing parts

IEC 61032 Test Probes Protection Of Persons And Equipment By Enclosures-Probe For Verification

 

 

IEC 61032 Test Probes Protection Of Persons And Equipment By Enclosures-Probe For Verification

 

 

 

 

Tags: Electrical Test Equipment, Electrical Appliance Tester, IEC Test Equipment

滚动至顶部