AS/NZS 3112 Figure 3.6 Device for Checking the Resistance to Lateral Strain (Three-Pin Test Plug) SC-AS/NZS3112-F3.6

AS/NZS 3112 Figure 3.6 Three-pin Lateral Strain Test Plug product picture 1

SC-AS/NZS3112-F3.6

Product overview

The AS/NZS 3112 Figure 3.6 test plug (SC-AS/NZS3112-F3.6) is a three-pin device for checking the resistance to lateral strain of 10A flat-pin plugs and socket-outlets. Manufactured strictly to the dimensions of Figure 3.6 of AS/NZS 3112, it applies the specified lateral force to the inserted plug so that the socket contact system can be verified against the mechanical strength requirements of the standard.

Specifications

  • Standard: AS/NZS 3112, Figure 3.6 – device for checking the resistance to lateral strain (three-pin gauge)
  • Model: SC-AS/NZS3112-F3.6, for 10A 250V flat-pin plug systems
  • Pin width 1.58 +0.02/0 mm and pin thickness 6.2 +0.02/0 mm gauge sections with 60° pin spacing
  • Gauge body of Ø50 mm with precision-machined pins; key dimensions 17.06 ±0.02 mm, 19.94 ±0.02 mm, 42 ±0.5 mm
  • Hardened steel construction for dimensional stability and long service life

Test procedures

  • Insert the Figure 3.6 test plug fully into the socket-outlet.
  • Apply the lateral force specified by Clause 3.3.4 of AS/NZS 3112 in the prescribed directions.
  • Verify that the plug remains fully inserted and that the socket meets the lateral strain resistance requirement.

Application

  • Lateral strain testing of Australian 10A plugs and socket-outlets per AS/NZS 3112.
  • Quality control in socket/plug manufacturing and third-party certification testing.

Product pictures

AS/NZS 3112 Figure 3.6 Three-pin Lateral Strain Test Plug product picture 1
Product picture 1
AS/NZS 3112 Figure 3.6 Three-pin Lateral Strain Test Plug product picture 2
Product picture 2
AS/NZS 3112 Figure 3.6 Three-pin Lateral Strain Test Plug product picture 3
Product picture 3
AS/NZS 3112 Figure 3.6 Three-pin Lateral Strain Test Plug product picture 4
Product picture 4

Standard drawing

AS/NZS 3112 Figure 3.6 standard drawing
Standard drawing referred to above
Scroll to Top