AS/NZS 3112 Figure 3.1(d) Gauge for Depth of Contact Tests of Socket-Outlets 10A/15A SC-AS/NZS3112-F3.1(d)

AS/NZS 3112 Figure 3.1(d) Contact Depth Gauge 10A/15A product picture 1

SC-AS/NZS3112-F3.1(d)

Product overview

The AS/NZS 3112 Figure 3.1(d) Gauge for Depth of Contact Tests SC-AS/NZS3112-F3.1(d) is designed to verify the accessible depth of the contact tubes of 10A/15A socket-outlets complying with AS/NZS 3112. Together with the Figure 3.1(a) non-contact depth gauge, it checks that live parts cannot be touched and that the depth of insertion of the contact tubes meets the dimensional requirements of the standard, ensuring safe and reliable engagement with Australian/New Zealand flat-pin plugs.

Specifications

  • Standard: AS/NZS 3112, Figure 3.1 (d/e/f) – gauges for depth of contact tests
  • Model: SC-AS/NZS3112-F3.1(d), for 10A/15A socket-outlets
  • Precision-manufactured gauge body with hardened, wear-resistant gauge pins
  • Strict dimensional tolerances in accordance with Figure 3.1 of AS/NZS 3112
  • Suitable for type testing, routine inspection and certification testing of Australian socket-outlets

Test procedures

  • Insert the gauge into each contact tube of the socket-outlet in turn.
  • Check that the gauge enters to the depth specified by Figure 3.1(d) and that the accessible-depth requirement is met.
  • Record the result for each pole and repeat for the sample set.

Application

  • Type and routine testing of 10A/15A Australian socket-outlets per AS/NZS 3112.
  • Compliance verification by certification bodies and third-party laboratories.
  • Incoming inspection of socket components for the Australian and New Zealand markets.

Product pictures

AS/NZS 3112 Figure 3.1(d) Gauge for Depth of Contact Tests 10A/15A product picture 1
Product picture 1
AS/NZS 3112 Figure 3.1(d) Gauge for Depth of Contact Tests 10A/15A product picture 2
Product picture 2
AS/NZS 3112 Figure 3.1(d) Gauge for Depth of Contact Tests 10A/15A product picture 3
Product picture 3

Standard drawing

AS/NZS 3112 Figure 3.1 (d)(e)(f) standard drawing
Standard drawing referred to above
Scroll to Top