SC-AS/NZS3112-F3.10
Product overview
The AS/NZS 3112 Figure 3.10 gauge (SC-AS/NZS3112-F3.10) verifies the minimum withdrawal force of socket-outlets according to Clause 3.14.8.1 of AS/NZS 3112. The gauge pin enters the contact tube and the socket must retain the gauge with at least the specified minimum force, ensuring reliable contact pressure over the service life of the socket-outlet.
Specifications
- Standard: AS/NZS 3112, Clause 3.14.8.1, Figure 3.10
- Minimum withdrawal force: 1.5 N for socket-outlets ≤10A; 2 N for >10A and ≤15A; 3 N for >15A
- Gauge pin width: 6.20 +0.02/0 mm; thickness: 1.58 +0.02/0 mm; length unlimited
- Surface roughness of the effective length not exceeding 0.8 µm
- Supplied for line (L), neutral (N) and earth (E) contact tubes
Test procedures
- Insert the Figure 3.10 gauge pin into each contact tube of the socket-outlet.
- Withdraw the gauge axially and measure the retention force.
- Confirm that the measured force is not less than the minimum value for the socket rating.
Application
- Minimum withdrawal force verification of Australian socket-outlets per AS/NZS 3112.
- Production quality control and certification testing of 10A/15A/20A sockets.
Product pictures


