AS/NZS 3112 Clause 3.14.8.3 Figure 2.1(a1) Maximum Withdrawal Force Test Plug SC-AS/NZS3112-F2.1(a1)

AS/NZS 3112 Figure 2.1(a1) Maximum Withdrawal Force Test Plug product picture 1

SC-AS/NZS3112-F2.1(a1)

Product overview

The AS/NZS 3112 Figure 2.1(a1) test plug SC-AS/NZS3112-F2.1(a1) is used together with a force gauge to verify the maximum withdrawal force of socket-outlets according to Clause 3.14.8.3 of AS/NZS 3112. The plug is manufactured to the (a1) 10A/15A 250V three-pin flat-pin configuration of Figure 2.1, so that the retention force of the socket contacts can be measured accurately.

Specifications

  • Standard: AS/NZS 3112, Clause 3.14.8.3, Figure 2.1 (a1)
  • Configuration: three-pin plugs, 10A or 15A, 250V max.
  • Precision-machined flat pins to the Figure 2.1(a1) dimensions and 60° pin spacing
  • Hardened steel body with grounding bush for connection to a withdrawal-force gauge

Test procedures

  • Insert the Figure 2.1(a1) test plug into the socket-outlet.
  • Withdraw the plug axially with the force gauge and record the maximum force.
  • Confirm the withdrawal force does not exceed the limit of Clause 3.14.8.3.

Application

  • Maximum withdrawal force testing of Australian 10A/15A socket-outlets per AS/NZS 3112.
  • Certification and routine quality testing of sockets and plug-socket systems.

Product pictures

AS/NZS 3112 Figure 2.1(a1) Maximum Withdrawal Force Test Plug product picture 1
Product picture 1
AS/NZS 3112 Figure 2.1(a1) Maximum Withdrawal Force Test Plug product picture 2
Product picture 2

Standard drawing

AS/NZS 3112 Figure 2.1 (a1) standard drawing
Standard drawing referred to above
Scroll to Top