Turning moment gauge to BS 1363-2 Figure 15 with a 750 g weight, used to apply the specified lateral stress to socket contacts and to check their resistance to deformation.
Product identification
| Item | Specification |
|---|---|
| Model | SC-BS1363-F15 |
| Figure | Figure 15 – Turning moment gauge |
| Product | BS1363 Figure 15 Turning Moment Gauge with 750 g Weight |
Product photos
Application and test method
Insert the gauge pins into the contacts of the socket-outlet under test and hang the 750 g weight on the arm so that the contacts carry the specified turning moment. After the specified period remove the weight and check the contacts for permanent deformation, then repeat the contact and withdrawal checks as required by the standard.
Technical data
| Item | Specification |
|---|---|
| Standard | BS 1363-2:1995 incl. amendments |
| Figure | Figure 15 – Turning moment gauge |
| Applied load | 750 g weight on the specified arm |
| Socket type | 13 A three-pin socket-outlet |
| Gauge material | Stainless steel, hardened ground pins |
| Weight | Stainless steel, marked 750 g |
| Arm length | approx. 150 mm |
| Marking | BS1363 Figure 15 Turning moment gauge |
Standard drawing
Handling and maintenance
Load the weight slowly, without impact, and inspect the gauge pins for wear after each test.
For the complete BS 1363 range of gauges and test apparatus, contact Guangzhou Shice Instrument for selection and quotation.