Product Overview
Model: SC-GX53-142
Standard drawing: IEC/EN 60061-3 — 7006-142-1 (GX53 lamp cap gauge)
Application: GX53 bayonet lamp caps inspection gauge, manufactured to the IEC/EN 60061-3 gauge drawings.
Purpose
To check caps GX53 in the following respects: the diameter of the individual pins (dimension A); the combined displacement and diameter of the pins (dimensions A and D); the length of the pins (dimension F1); the recess length and diameter of the pins (dimensions F2 and E); the maximum cap outline with respect to dimensions M, L1 and K.
Testing
It shall be possible to insert the individual pins of the cap from surface Z into hole a1 and remove the pin along the slot. It shall not be possible to insert the pins of the cap into hole a2. It shall be possible to insert the cap from surface Z into the gauge until the reference plane of the cap is in contact with surface Y of the gauge. In this position neither the pins nor the centre post shall project beyond the surface of the gauge.
Product Pictures
Standard Drawing (Reference)
