Foot Probe SC-60335-F102 – IEC 60335-2-107:2017 Figure 102 / GB/T 4706.110-2021
The Foot Probe SC-60335-F102 is manufactured in accordance with IEC 60335-2-107:2017 Figure 102 / GB/T 4706.110-2021. It is used to verify the guarding of blade housings and enclosure openings of robotic lawnmowers and similar household garden machinery, determining whether a child’s foot/leg can reach the rotating blade or other hazardous moving parts through an opening. The SC-60335-F102 simulates a child foot and is the companion test tool for IEC 60335-2-107 lawnmower safety testing.
Technical Parameters
| Item | Parameter |
|---|---|
| Standard figure | IEC 60335-2-107:2017 Figure 102 |
| Simulates | child foot |
| Shank / length | Ø80 (±0.8 mm), 400 (±1.2 mm) long |
| Angle | 40° (±1°) |
| Foot length | 150 (±1.2 mm) |
| Foot width | 90 (±0.8 mm) |
| Foot thickness | 35 (±0.8 mm) |
| Foot height | 70 (±0.8 mm); toe radius R15 (±0.5 mm) |
Construction & Material
The foot simulator is laser-cut from basswood and connected to a metal guide rod, with a smoothly finished surface. Machined to the key dimensions shown on the standard figure, with tolerances per the drawing; supplied with a dedicated storage case.
Standard Drawing
Test Method & Acceptance
- 1) Select the corresponding foot probe per the equipment under test (SC-60335-F102 simulates a child foot);
- 2) Insert the probe through the enclosure opening and advance it along the intended path until it meets the stop;
- 3) Apply the force specified by the relevant clause, varying the insertion angle if required, to simulate the reachable range of a child’s foot;
- 4) Observe whether the probe tip can touch the blade, blade disc or other hazardous moving parts; reachability indicates inadequate guarding.