Gauge (NBN C61-112-1) (Model:SC-NC1XX)
Application:
J&Y offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.
Conforms To:
NBN C61-112-1
Specification:
Model No. | Standard | Products | Qty |
SC-NC1 | Gauges C1 | 10/16A 250V two-pole socket-outlets, a1=6.0, a1=5.8
Gauges c1 for size of entry holes for plug pins |
2 |
SC-NC1A | Gauges C1A | 2.5A 250V two-pole socket-outlets, a1=5.2, a1=5.0
Gauges c1 for size of entry holes for plug pins |
2 |
SC-NC2A | Gauges C2A | 10/16A 250V two-pole socket-outlets and two-pole plugs with pin-type earthing-contact; Gauges c2 for minimum opening of contact tubes | 1 |
SC-NC2B | Gauges C2B | 10/16A 250V two-pole socket-outlets and two-pole plugs with pin-type earthing-contact; Gauges c2 for minimum opening of contact tubes | 1 |
SC-NC2C | Gauges C2C | 2.5 A 250V two-pole portable socket-outlets
Gauges c2 for minimum opening of contact tubes |
1 |
SC-NC3 | Gauges C3 | 10/16A 250 V Two-pole socket-outlets
Gauge c3 for acceptance of two pole plugs |
1 |
SC-NC3A | Gauges C3A | 2.5 A 250V two-pole portable socket-outlets
Gauge c3 for acceptance of two-pole plugs |
1 |
SC-NC4 | Gauges C4 | 2.5 A 250V two-pole socket-outlets
Gauges c4 for distance to point of first contact |
1 |
SC-NC7A | Gauges C7A | 10/16A 250V two-pole socket-outlets
Gauges c7 for distance to point of first contact |
1 |
SC-NC7B | Gauges C7B | 10/16A 250V two-pole socket-outlets
Gauges c7 for distance to point of first contact |
1 |
SC-NC7C | Gauges C7C | 10/16A 250V two-pole socket-outlets
Gauges c7 for distance to point of first contact |
1 |
SC-NC7D | Gauges C7D | 10/16A 250V two-pole socket-outlets
Gauges c7 for distance to point of first contact |
1 |
SC-NC7E | Gauges C7E | 10/16A 250V two-pole socket-outlets
Gauges c7 for distance to point of first contact |
1 |
SC-NC9A | Gauges C9A | 2.5A 250V and 10/16A250V two-pole plugs and 10/16A 250V two-pole socket-outlets with pin-type earthing contact ; Gauges c9 for pin diameter | 2 |
SC-NC9B | Gauges C9B | 2.5A 250V and 10/16A250V two-pole plugs and 10/16A 250V two-pole socket-outlets with pin-type earthing contact; Gauges c9 for pin diameter | 2 |
SC-NC10A | Gauges C10A | 10/16A 250Vtwo-pole plugs, Gauges c10 for pin spacing | 1 |
SC-NC10B | Gauges C10B | 10/16A 250Vtwo-pole plugs, Gauges c10 for pin spacing | 1 |
SC-NC11A | Gauges C11A | 10/16A 250V two-pole socket-outlets and two-pole plugs with pin-type earthing-contact; Gauge c11 for maximum opening of contact tubes | 1 |
SC-NC11B | Gauges C11B | 2.5 A 250V two-pole portable socket-outlets
Gauge c11 for maximum opening of contact tubes |
1 |
SC-NC12 | Gauges C12 | 10/16A 250V two-pole plugs with side earthing-contacts
Gauge c12 for interchangeability |
1 |
SC-NC13 | Gauges C13 | 2.5A 250V two-pole plugs for class ii appliances
Gauge for interchangeability |
1 |
SC-NC18 | Gauges C18 | 10/16A 250V two-pole socket-outlets without earthing contact
Gauge for checking impossibility of single-pole insertion of plugs |
1 |
SC-NC18A | Gauges C18A | 2.5 A 250V two-pole socket-outlets without earthing
contact Gauge for checking impossibility of single-pole insertion of plugs |
1 |
SC-NC19A | Gauges C19A | 2.5A 250V and 10/16A 250V two-pole plugs; Gauges for checking impossibility of single-pole insertion of plugs into socket-outlets | 1 |
SC-NC19B | Gauges C19B | 2.5A 250V and 10/16A 250V two-pole plugs; Gauges for checking impossibility of single-pole insertion of plugs into socket-outlets | 1 |
SC-NC42A | Gauges C42A | 2.5A 250V | 1 |
SC-NC42B | Gauges C 42B | 2.5A 250V | 1 |
SC-NC42C | Gauges C 42C | 2.5A 250V | 1 |
SC-NC43 | Gauges C 43 | 2.5A 250V and 16A 250V | 1 |