Rigid Test Finger Probe 11 with 50N Force IEC61032 Figure 7 SC-F711-F2
Product information:
Rigid test finger probe SC-F711-F2 conforms to the standard requirement of IEC61032 figure 7 device 11, IEC60884, IEC60598, IEC60335, IEC60065. It is the rigid test finger with 50N force (0-50N force applied through the dynamometer connection), used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).
Technical parameters:
| Parameters / Model | SC-F711-F2 | |
|---|---|---|
| Name | Name | Test finger with 50N force |
| 1 | 1 | 20 0/-0.05 |
| 2 | 2 | 80±0.2 |
| 3 | 3 | R2±0.05 |
| 4 | 4 | S4±0.05 |
| 5 | 5 | 37° 0 -10′ |
| 6 | 6 | 14° 0 -10′ |
| 7 | 7 | Φ12 0/-0.05 |
| 8 | 8 | —- |
| 9 | 9 | —- |
| 10 | 10 | 0-50N force |
Related products:
Standard drawing:
