IEC 61032 Figure 13 Test Probe 19 5.6mm Small Finger Probes SC-F1319

SC-F1319  IEC 61032 Figure 13 Test Probe 19

Product overview

The IEC 61032 Figure 13 Test Probe 19 (5.6mm small finger probe) is built to simulate how children aged 36 months or younger might access hazardous parts in electrical or medical equipment. It features a 5.6mm-diameter metal “finger” for realistic contact testing, paired with an insulating handle. The handle is provided with an extension, 464.3 mm long and the probe should be applied with or without this extension, whichever is the more onerous condition.Both joints shall permit movement in the same plane and the same direction through an angle of 90°.

The probe with cable, and can connect to SC-CT02 Low-voltage Test Supply Power 42V power supply

Low-voltage Test Supply Power Electric Contact Indicator 42V power supply SC-CT02

Specifications

• • Probe Type: IEC 61032 Figure 13 Test Probe 19 (small finger probe for child access simulation)
• • Probe Diameter: 5.6 mm ± 0.1 mm (metal “finger”)
• • Handle Extension Length: 464.3 mm ± 0.8 mm (mimics a child’s arm)
• • Key Dimensions: 101.6 mm ± 0.3 mm (probe section), 44 mm ± 0.15 mm (joint spacing), 25.9 mm ± 0.2 mm (collar diameter)
• • Joint Movement: 90° angle in the same plane and direction (both joints)
• • Probe Tip: Hemispherical (R2.8 mm ± 0.05 mm)
• • Material Probe: Metal; Handle: Insulating material
• • Cable Inclusion: None (cabled version available for low-voltage testing)
• • Core Function: Simulates child (≤36 months) access to hazardous parts in equipment
• Test Procedures:
• • Inspect the probe for damage (e.g., bent metal finger, cracked handle).
• • Attach the 464.3mm handle extension if testing worst-case access.
• • Adjust the joints to a 90° angle (as needed) to mimic a child’s hand movement.
• • Gently guide the probe’s tip toward potential access points of hazardous parts.
• • Check if the probe touches any hazardous components.
• • Record whether the equipment blocks child access (pass/fail).

Applications

• • Child access testing for household appliances (e.g., baby monitors).
• • Safety checks for home-use medical equipment (e.g., pediatric nebulizers) .
• • Verification of toy-related electrical devices (e.g., battery-powered ride-ons) to block child access to hazards.
• • Compliance testing for infant care appliances (e.g., bottle warmers) to prevent mechanical/electrical risks.
• • Quality control for small home electronics (e.g., portable speakers) with child-accessible openings.Test Probe 19 of IEC 61032 5,6 mm Small Finger Probes
• IEC 60601-1-11 Figure 1

Test procedure

1. • Inspect the probe for damage (e.g., bent metal finger, cracked handle).
2. • Attach the 464.3mm handle extension if testing worst-case access.
3. • Adjust the joints to a 90° angle (as needed) to mimic a child’s hand movement.
4. • Gently guide the probe’s tip toward potential access points of hazardous parts.
5. • Check if the probe touches any hazardous components.
6. • Record whether the equipment blocks child access (pass/fail).

Product pictures

Standard drawing