Pair of withdrawal pull gauges to BS 1363-2 Figure 16 – 16a for the earthing contact and 16b for the line / neutral contacts – used to verify that the contact force of socket contacts is sufficient.
Product identification
| Item | Specification |
|---|---|
| Model | SC-BS1363-F16 |
| Figure | Figure 16 – Withdrawal pull gauges for effectiveness of contact |
| Product | BS1363 Figure 16 Withdrawal Pull Gauges 227 g |
Product photos
Application and test method
Insert the pins of the appropriate gauge into the contact under test. Each gauge is made up to a total mass of 227 g. The gauge shall remain in the contact for the specified period without falling out, which demonstrates adequate contact pressure. The E contact and the L / N contacts are tested separately with the matching gauge.
Technical data
| Item | Specification |
|---|---|
| Standard | BS 1363-2:1995 incl. amendments |
| Figure | Figure 16 – Withdrawal pull gauges for effectiveness of contact |
| Composition | 16a earthing gauge + 16b line / neutral gauge |
| Total mass | 227 g (+1.5 / 0) each |
| Pin dimensions | Per Figure 16, specific to each pole |
| Material | Stainless steel, hardened ground pins |
| Socket type | 13 A three-pin socket-outlet |
| Marking | BS1363 Figure 16a / 16b + serial number |
Standard drawing
Handling and maintenance
The total mass of each gauge must stay within tolerance; re-weigh after replacing any part.
For the complete BS 1363 range of gauges and test apparatus, contact Guangzhou Shice Instrument for selection and quotation.