SC-AS/NZS3112-F2.3
Product overview
The AS/NZS 3112 Figure 2.3 test block (SC-AS/NZS3112-F2.3) is used for checking the seam of folded flat pins according to Clause 2.2.3 of AS/NZS 3112. The gauge checks that the folded pin seam of plugs is properly closed and positioned so that the pin meets the dimensional and safety requirements of the standard.
Specifications
- Standard: AS/NZS 3112, Clause 2.2.3, Figure 2.3 – sectioned view of folded pin form
- Checking pin 0.3 ±0.03 mm with square end
- Gauge depth Q = 1.58 mm min., dimension C per the table and notes to Figure 2.1
- Hardened steel construction with precision-ground checking surfaces
Test procedures
- Place the gauge over the folded pin of the plug.
- Check the seam position and closing of the folded pin against the Figure 2.3 requirements.
- Record pass/fail for each pin of the sample.
Application
- Folded pin seam inspection of Australian flat-pin plugs per AS/NZS 3112.
- Quality control in plug manufacturing and certification testing.
Product pictures
Standard drawing
